That'll be fine. You'll need an M3 bolt and nut to attach it to the regulator, but you will be able to get away without the usual insulating pad and bush in this instance. Don't worry about heatsink compound (aka Thermpath). It probably will be easiest to attach the heatsink to the regulator and then solder it to the board. You'll have to leave the leads a bit long to clear VR1.Too small or just right? (The top option labelled bolt on) https://www.ebay.co.uk/itm/285081761321
Statistics: Posted by julie_m — Fri Dec 06, 2024 2:54 pm