Part 1b, The 6502A PCB
Soldering components continued.
The vertically mounted resistor now all in. The link headers fitted. The 20 way IDC latched header fitted. And the electrolytic capacitor used in the reset circuit also fitted.
So that's nearly all the soldered components fitted. Only the main connector for the backplane left outstanding. I need to dig through a different box of parts to find those...
![Image]()
![Image]()
![Image]()
![Image]()
You may spot that I wired up and soldered the link wires for the EPROM configuration (LK9 on the PCB silk screen).
Mark
Soldering components continued.
The vertically mounted resistor now all in. The link headers fitted. The 20 way IDC latched header fitted. And the electrolytic capacitor used in the reset circuit also fitted.
So that's nearly all the soldered components fitted. Only the main connector for the backplane left outstanding. I need to dig through a different box of parts to find those...
You may spot that I wired up and soldered the link wires for the EPROM configuration (LK9 on the PCB silk screen).
Mark
Statistics: Posted by 1024MAK — Tue Mar 18, 2025 1:00 pm